Problem solving when removing the catheter

Non deflating balloon

Possible reasons Possible solutions
Valve port and balloon inflation channel may be compressed Check on external compression problems
Faulty valve mechanism
  • Valve port should always be aspirated slowly, if done forcefully the valve may collapse.
  • Try a different syringe.
  • Leave attached with the plunger removed for 20mins.
  • Milk the catheter along its length to remove or unblock any obstructions.
  • Insert a few mls of sterile water which may help to clear any blockage.
Do not attempt to burst the balloon by over inflation, or cut the catheter at the inflation arm. Seek medical advice.